- YEDA COMPETITION
- CROSS GAMES EUROPE 2023
- Vánoční driftpárty 2022
- YEDA Drift party
- Czech season 2020
- CROSS GAMES EUROPE 2019
- YEDA Drift Party 2019
- YEDA BORY MALL RACE 2019
- CROSS GAMES EUROPE 2018 »
- YEDA / PROTENG Champ. 2018
- CROSS GAMES EUROPE 2017
- YEDA Open CZ/SK Championship
- YEDAcup2017
- Set-Up Driftparty 2017
- CROSS GAMES EUROPE 2016
- YEDAcup2016
- King of RC Nation-Cz/Sk 2016
- Christmas Drift Party 2016 »
- End of Summer 2015 »
Items in action
Contacts
Tomáš Viktora
Vazová 2498
68801 Uherský Brod
phone: +420 776 343 333
info(a)yeda-shop.eu
Czech Republic
EUROPE
Vazová 2498
68801 Uherský Brod
phone: +420 776 343 333
info(a)yeda-shop.eu
Czech Republic
EUROPE
COMPLETE INFOS ABOUTH CHASSIS
OVERDOSE
Introduction » YOKOMO » Option / Spare Parts Chassis » DRB
YOKOMO / DRB
Option parts for YD-4, super low friction aluminum made big bore shock set. The cylinder diameter is wider than the conventional shock, and the shock length is newly designed for drift. As an on-load shock, it increased the stability feeling by setting it to the maximum capacity. The cylinder also performs Kashima coating treatment to realize smooth and smooth operation, absorbing minute
our price € 78.5 (2,041.0 Kč)
BD7-2016 standard SLF short Shock 2 for the piston. Four holes of the kit standard Φ1.1mm.
our price € 5.2 (135.2 Kč)
Optional parts for BD8 2018, plastic protector used in conjunction with aluminum drive cup. It attaches to the tip of the bone of the universal shaft to prevent the wear of the drive cup and improve the response.
our price € 4.2 (109.2 Kč)
Bearings used inside the differentials of each car. Outer diameter 8 mm, inner diameter 5 mm. 4 pieces.
our price € 11.3 (293.8 Kč)
Bearings supporting front and rear gear boxes such as drift package series and axle of BD 5 series. Outer diameter 10 mm, inner diameter 5 mm. 2 pieces entered.
our price € 5.2 (135.2 Kč)
BD5, it is made of aluminum rod that connects the stabilizer and the suspension arms for the DRB. and reduce the unsprung weight, lightweight rod blue anodized took, head to have a groove for the hex wrench, adjust the stabilizer has become to be easy. Parts content aluminum stabilizer rod Aluminum Stabilizer Rod × 2
our price € 4.6 (119.6 Kč)
Of BD5 / DRB is a large-capacity shock cylinder bottom side of the shock end. 4 pieces.
our price € 2.9 (75.4 Kč)
BD-S103 ø1.0 × 3 Hole Piston
BD-S103
BD-S103
Large capacity shock cylinder piston of BD5. three φ1.0mm hole ×. Parts content piston Piston × 4
our price € 5.2 (135.2 Kč)
It is a battery holder of drift package DRB / DPM / (DIB) standard parts .
our price € 9.0 (234.0 Kč)
our price € 36.5 (949.0 Kč)
Spare O-ring for regulating the down stop of LF professional shock. 8-month-filled.
our price € 1.4 (36.4 Kč)
YS-7S O Ring (Soft)
YS-7S
YS-7S
More standard clear type is O-ring to prevent the oil leakage from the shock shaft portion. .
our price € 1.4 (36.4 Kč)
This is the thrust washer and a set of thrust for a ball that can be used for maintenance for the ball diff. Parts contentthrust washer Thrust Washer × 2 thrust ball Thrust Ball × 18
our price € 2.4 (62.4 Kč)
Adjustable screw for ball differential that can be used for maintenance for the ball differential, nut, is a set of spring. . Parts contentadjustable screw Adjustable Screw × 2 nylon lock nut 2.6mm Nylon Lock Nut × 2 Adjustable spring Adjustable Spring × 2
our price € 3.2 (83.2 Kč)
Such as amplifier fixed, lowering of the adhesion force is also in the generation portion of the heat is low, is the heat resistance of the double-sided tape. Tape of 25mm width has led three.
our price € 2.9 (75.4 Kč)
It is an aluminum servo horn that transmits the servo's motion more directly. The distance from the servo output shaft to the center of the pillow ball attachment hole at the tip is 20 mm in design designed to match the servo shaft spline (23T) made by Sanwa or KO. It is the best size for touring cars.
our price € 15.8 (410.8 Kč)
It is an aluminum servo horn that transmits the servo's motion more directly. The distance from the servo output shaft to the center of the pillow ball attachment hole at the tip is 20 mm in design designed for Futaba servo shaft spline (25 T). It is the best size for touring cars.
our price € 15.8 (410.8 Kč)
It can be used, such as the height adjustment of the upper arm and suspension mounts, black anodized aluminum shim. Parts content Arumishimu φ3 × φ6 × 0.5mm Aluminum Shim × 8
our price € 4.8 (124.8 Kč)
It can be used for various shim adjustments, black anodized aluminum shim. Parts content Arumishimu φ3 × φ6 × 1.0mm Aluminum Shim × 8
our price € 4.8 (124.8 Kč)
It can be used, such as the height adjustment of the upper arm and suspension mounts, black anodized aluminum shim. Parts content Arumishimu φ3 × φ6 × 2.0mm Aluminum Shim × 8
our price € 4.8 (124.8 Kč)
